Fire Product Search

Axis EN Fire Panels

Advanced

Axis EN Fire Panels are Advanced’s highest performance EN54 approved panel range and is fully compliant with parts 2, 4 and 13.

It is the result of decades of fire alarm and detection experience and research and development involving installers, specifiers, consultants and end users across the world.

Axis EN panels have been designed to offer more power and performance in a user-friendly enclosure. Axis EN packs more configuration, display, status and control options into its interface as standard than any other Advanced fire panel, which means less time and expense customising a system with peripherals.

Axis EN’s processing power and advanced component design means it delivers more features, an advantage it will maintain for years to come.

Every Axis EN panel features Advanced’s unbeatable networking capabilities and Dynamix Tools fire panel software making it is easy to use and configure, from the smallest to the largest of sites and with complicated cause-and effect.

Axis EN 1 Loop Panel

Advanced’s state of the art 1 loop analogue addressable Fire Control Panel is compliant with EN54 parts 2,4 and 13 and features:

  • Single loop analogue addressable fire panel
  • Small enclosure (See datasheet for dimensions)
  • Maximum 7Ah internal batteries
  • Optional programmable key switch
  • Programmable Input via Keypad or Software config tool
  • 20 programmable zonal / 25 System LEDs.
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dedicated USB & RS232 Serial Port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and On-board Scope facility.
  • Medium, Large and Deep enclosure options
  • Graphical display configurable for virtually any language.
  • Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Integral P-Bus for system expansion via available option cards.
  • Ad-NeT peer-to-peer network with up to 2000 zones
  • Approved to BS EN54 part 2, 4 and 13
  • 3 Year Warranty
  • Display installers logo using Logo Config Tool

Axis EN 2 Loop Panel

Advanced’s state of the art 2 loop analogue addressable Fire Control Panel is compliant with EN54 parts 2,4 and 13 and features:

  • One or two loop analogue addressable fire panel
  • Medium enclosure
  • Maximum 12Ah internal batteries
  • Up to 50 additional programmable LEDs
  • Up to 8 programmable key switches or 4 plus printer
  • Plexi-glass door option
  • Large and Deep enclosure options
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dual flash-based microprocessor technology with real-time clock on-board.
  • Dedicated USB & RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and On-board Scope facilities for ease of commissioning and fault finding.
  • Graphical display configurable for virtually any language
  • Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Fully programmable via the on-board alphanumeric keypad, or PC configuration tools.
  • Integral ‘P-Bus’ for system expansion via available option cards
  • Ad-NeT peer-to-peer network with up to 2000 zones
  • Approved to BS EN54 part 2, 4 and 13
  • 3 Year Warranty
  • Display installers logo using Logo Config Tool

Axis EN 4 Loop Panels

Advanced’s state of the art 4 loop analogue addressable Fire Control Panel is compliant with EN54 parts 2,4 and 13 and features:

  • One to four loops
  • Large enclosure
  • Maximum 17Ah internal batteries
  • Up to 200 additional programmable LEDs
  • Up to 8 programmable key switches or 4 plus printer
  • Plexi-glass door option
  • Deep and Extended enclosure options
  • 20 programmable Zonal / 25 System LEDs.
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dedicated USB & RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding.
  • The graphical display can be configured to operate with virtually any language or character set, and allow the installer’s logo to be applied using the Logo application software.
  • Integral P-Bus for system expansion via available option cards.
  • Ad-NeT peer-to-peer network with up to 2000 zones
  • Approved to BS EN54 part 2, 4 and 13.

Axis EN  8 Loop Panel

Advanced’s state of the art 8 loop analogue addressable Fire Control Panel is compliant with EN54 parts 2,4 and 13 and features:

  • Two to eight loops
  • Extended enclosure
  • Maximum 45Ah internal batteries
  • Up to 200 additional programmable LEDs, 2 x switch cards or mimic
  • Up to 8 programmable key switches or 4 plus printer
  • Plexi-glass door and external battery box option
  • Fully expandable from 2 – 8 loops via plug-in loop driver boards.
  • 20 programmable Zonal / 25 System LEDs with slide-in labels.
  • Dedicated loop driver for Apollo or Hochiki protocol support.
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dual flash-based microprocessor technology with real-time clock on-board.
  • Dedicated USB & RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding.
  • Fully programmable via the on-board alphanumeric keypad, or PC configuration tools.
  • The graphical display can be configured to operate with virtually any language or character set, and allow the installer’s logo to be applied using the Logo application software.
  • Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • 2 x 5 Amp power supply and charger to En54 part 4.
  • Integral P-Bus for system expansion via available option cards.
  • Ad-NeT peer-to-peer network with up to 2000 zones.

Axis EN Remote Terminals

The remote terminals utilise the same graphical LCD user interface that can be found on the Axis EN series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All remote terminals incorporate buzzer mute, view, enable/disable and test facilities with dedicated system and navigation keys for simple user control.

Three types available including:

− MX-5010 – Remote Display Terminal
− MX-5020 – Remote Control Terminal with additional Mute, Silence, Reset and Resound keys
− MX-5030 – Remote Control Terminal with additional LED status indication, four programmable push buttons, Mute, Silence, Reset, Resound, Lamp Test and Evacuate Keys.

Optional level 2 access enable key switch

Integrated standard or fault-tolerant network interface with screen termination point

Programmable display for up to 2,000 zones along with sector based controls

  • Axis EN Fire Panels
  • Axis EN Fire Panels

Product Enquiry

Fill out the form below and we will contact you with further details on this product and its manufacture..

I would like to:


Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

Advanced is known all over the world for making the best quality, best performing fire systems. Fire Systems are in our DNA. The people that started Advanced are the people that spearheaded modern intelligent, addressable fire systems.

Newsletter Subscribe

Sign up to the FREE monthly Fire Product Search Newsletter.

Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you signed up for.